HOW TO TO BECOME CCO CERTIFIED
Visit How to Test for instructions for applying for and taking CCO Written and Practical Exams; visit How to Recertify for instructions on recertification. Complete instructions and exam applications are also contained in the Candidate Handbook for each program.
DEFINITION OF A RIGGER
A certified rigger is a person who has been trained and certified to handle and move loads. The level of certification depends upon the individual’s training, knowledge, skill base, and ability to perform functions related to the selection, inspection, and proper use of rigging equipment.
This person may be qualified in a craft or trade and carry an occupational title such as iron worker, electrician, carpenter, millwright, mechanic, laborer, mason, longshoreman, lineman, pipe fitter, boilermaker, and the like. (The persons described in the categories above will be referred to as rigger even though they carry another occupational title.)
CERTIFIED RIGGER LEVEL I
NCCCO identified the following job duties for Rigger Level I certification. A Certified Rigger Level I can perform simple, repetitive rigging tasks when the load weight, center of gravity, the rigging, and rigging configuration are provided or known by the rigger through experience or on-the-job training prior to the rigging activities. Specifically, Level I Riggers should be able to demonstrate or have knowledge of how to:
- Inspect rigging before use
- Identify and attach rigging with basic knowledge of hitch configurations, capacities, and basic knots
- Recognize associated hazards
- Signal operations
- Use various types of rigging equipment and basic hitches and their applications
CERTIFIED RIGGER LEVEL II
In addition to knowing and demonstrating Rigger Level I knowledge and skills, a Certified Rigger Level II can select rigging components and procedures based on rigging capacity. A Level II Rigger can perform the following rigging tasks unsupervised:
- Estimate load weight and center of gravity
- Identify lift points
- Determine and select rigging based on loading
- Perform pre-use inspection of rigging and lift points
- Identify and attach rigging with knowledge of hitch configurations and load angle factors, rigging capacities, and load integrity
- Understand load dynamics and associated hazards
As applicable, Level II Riggers will also have a working knowledge of hoisting equipment, winches, jacks, industrial rollers, and similar equipment.
ADDING RIGGER LEVEL II TO EXISTING RIGGER LEVEL I CERTIFICATION
Rigger Level I certificants are encouraged to “step up” to Rigger Level II when they feel they are ready for the more challenging exams. Rigger Level II can be added at any time; however, if a Rigger Level I certificant is in the final year of certification, the certificant may take the Rigger Level II written exam in place of the Rigger Level I recertification exam. In order to achieve full Rigger Level II certification, the candidate must pass the practical exam within 12 months of passing the Rigger Level II written exam. Candidates stepping up to Rigger Level II are encouraged to take the Rigger Level II written and practical exams at the same time or to take the Rigger Level II practical exam first.
Requirements for certification include the following:
Candidates are permitted to schedule and take both the Level I and Level II written and practical exams at the same time; however, for Rigger Level II certification to be valid, Rigger Level I certification must also be current.
NCCCO certification examinations are designed for persons who have been trained to handle and move loads.
CERTIFIED RIGGER LEVEL I EXAMS
The Certified Rigger Level I Written Examination consists of 60 multiple-choice questions. Candidates are allowed 60 minutes to complete the test.
The successful completion of an NCCCO Certified Rigger Level I Practical Examination demonstrates a candidate’s basic rigging competency.
CERTIFIED RIGGER LEVEL II EXAMS
The Certified Rigger Level II Written Examination consists of 40 multiple-choice questions. Candidates are allowed 60 minutes to complete the test.
The successful completion of an NCCCO Certified Rigger Level II Practical Examination demonstrates a candidate’s competency in rigging a load for a level lift and for rotating a load.
CERTIFICATION TIME FRAMES
Candidates must pass both Written and Practical Examinations to be certified for a five-year period. The Written and Practical Exams may be taken in either order. Candidates have 12 months from the time they pass their first Written or Practical Exam for each rigger level in which to pass the corresponding (Written or Practical) Exam.
Any tests passed within a 12-month period count towards certification. For example, a candidate who fails the Rigger Level I Written Exam in January 2011 but passes the Rigger Level I Practical Exam in June 2011 has until the end of June 2012 to retake (and pass) the Rigger Level I Written Exam.
The following policies apply to all CCO certification programs:
These policies are also covered in the Candidate Handbooks for each program.
CCO certification is valid for five years. Candidates must complete all of their recertification requirements during the 12 months prior to their certification’s expiration date. This includes:
There is no grace period after certification has expired. Candidates whose certification has lapsed must take the full Written and Practical Examinations to be certified again.
The Certified Rigger Level I Recertification Written Examination consists of 30 multiple-choice questions with a time limit of 30 minutes.
The Certified Rigger Level II Recertification Written Examination consists of 30 multiple-choice questions with a time limit of 60 minutes.
NOTE: Rigger Level II certificants must only take and pass the Rigger Level II recertification written exam to maintain both Rigger Level I and Rigger Level II certifications.
There is no requirement for a Practical Examination for recertification.
Get complete instructions on How to Recertify.
Certified riggers receive a laminated photo ID card at no cost when they certify for the first time and when they complete the requirements for recertification.
If a candidate has previously certified in another CCO program and subsequently becomes certified as a rigger or holds Rigger Level I certification and adds Level II certification, he/she may request an updated certification card.
Updated or replacement cards may be obtained from International Assessment Institute at a cost of $25. Cards may be ordered online or by contacting Jennifer at email@example.com or 727-449-8525.